This DJI D-RTK 2 Mobile Station Bag from GPC streamlines the transport of your entire RTK drone kit by allowing you to safely store the D-RTK 2, WB37 batteries, charging hub, and more separate from your drone, rather than bulking up with a larger hard case.

DJI Care Refresh 1-Year Plans allow for two replacements in one year, including one chance to use Flyaway Coverage. When it comes to accidents like water damage, collisions, or missing aircraft, you can have your product replaced for a small additional cost. For the DJI Mavic 3 Pro, the first Care Refresh replacement fee is $159, and the second replacement fee is $199. If you use the one available replacement under Flyaway Coverage, the replacement fee will be $739.

Accurate and responsive single-handed piloting is possible when you pair this RC Motion 2 Controller for Avata from DJI with the DJI Avata drone. Motion-sensing technology lets you control the Avata with just a slight turn of the wrist and now, you can fly backward without having to use the FPV Remote Controller 2 with your Avata.

This GPC M30 8 battery case holds up to four sets of TB30 flight batteries and four WB37 batteries giving you enough power for more than 2.5 hours of flight time and ~6 hours of runtime for your RC Plus without the need to charge.

DJI Care Refresh 1-Year Plans allow for two replacements in one year, including one chance to use Flyaway Coverage. When it comes to accidents like water damage, collisions, or missing aircraft, you can have your product replaced for a small additional cost. For the DJI Mavic 3, the first Care Refresh replacement fee is $159, and the second replacement fee is $199. If you use the one available replacement under Flyaway Coverage, the replacement fee will be $739.

On the road or on the set, professionals can’t get caught with a lack of power. That’s why GPC created the optimal Inspire 2 spare battery case solution. GPC has packed 8 flights into this case with 2 chargers and hubs to keep you up and running. One of the toughest challenges with the Inspire 2 can be airline travel and baggage issues. This case allows you to check your Inspire 2 and then carry-on the batteries in this perfect, manageable size.

The DJI Matrice 300 OSDK Expansion Module mounts to the top of the DJI M300 to allow for the mounting and connection of some available SDK accessories, such as the DJI Manifold 2. Access to DJI's Onboard SDK is required in order to fully utilize the DJI M300 OSDK Expansion Module.

Simultaneously record high-fidelity audio via two transmitters. DJI Mic can serve as an independent recording device and backup soundtrack recorder. This package includes one transmitter and one receiver.

This EVO II battery is a 3-cell (3S) LiPo battery with a maximum capacity of 7100 mAh and a maximum voltage of 13.2 V. This battery is compatible with all EVO II models.

Inspire 2 Propeller Guards are crafted with 12k pure carbon fiber mixed with high-strength epoxy resin. They're not only light but also 50 times more durable and 100 times more rigid than standard engineering plastics, making them exceptionally hard to break or deform. Small and easy to mount and detach, these guards protect the propellers from colliding with people and objects, providing an additional layer of flight safety. Consider when flying at particularly high speeds, the propeller guards may only have a limited impact on reducing damage from collisions. Always fly with caution and mind your surroundings.

The DJI Matrice 300 Upward Gimbal Connector adds the ability to mount an upward-facing payload to your DJI M300. This gimbal connector can be attached in addition to the factory single downward gimbal connector, or the available dual downward gimbal connector.

You are not able to attach this gimbal connector if you have the available CSM Radar attached.

This is the battery that powers the Mavic 3 drone from DJI. This is a 4-cell (4S) LiPo battery with a maximum capacity of 5000 mAh or 77 Wh. This battery will provide up to 46 minutes of flight time with your DJI Mavic 3.

Unlock the power of precise control with the DJI FPV Remote Controller 3. Whether you're a beginner or an experienced pilot, the Normal, Sport, and Manual modes offer customizable control options to suit your flying style. The DJI FPV Remote Controller 3 is crafted to be compatible with DJI O4 video transmission, and its innovative antenna design guarantees seamless connectivity. The Remote Controller 3's lightweight construction and extended control sticks enhance maneuverability and comfort.

In The Box:
1x DJI FPV Remote Controller 3
1x DJI FPV Remote Controller 3 Control Sticks (Pair)
1x L-shaped Screwdriver

The DJI FPV Remote Controller 2 adopts an ergonomic design with Hall effect control sticks, which enables a better operating experience. This remote is compatible with the DJI FPV and DJI Avata drones, and the DJI Goggles 2 and DJI FPV Goggles 2.

The GPC Mavic 3 w/RC Pro Case holds all of your Mavic 3 Fly More Combo contents, the RC Pro, and more. Designed to hold the DJI RC Pro remote controller, four total flight batteries, a charging hub and charger, a tablet up to 11", tablet mount, and more. There are even cavities for the UVT ProCare Lens Cleaning Pen and GPC microSD Card Holder.

The GPC Mavic 3 Case holds all of your Mavic 3 Fly More Combo contents and more. Designed to hold the standard DJI RC-N1 remote controller, four total flight batteries, a charging hub and charger, a tablet up to 11", tablet mount, and more. There are even cavities for the UVT ProCare Lens Cleaning Pen and GPC microSD Card Holder.

Whether you need extra storage or you're trying to keep the weight of your M300 case down, the GPC DJI Matrice 300 Battery Case is your answer. The weather-resistant, drop-resistant hard case comes with custom cut foam to house a total of six (6) DJI M300 TB60 batteries.

When you need on-the-go storage for your Phantom 4 Batteries the DJI Phantom 4 Battery Case by Go Professional Cases (GPC) is the premium solution. The weather-resistant, drop-resistant hard case comes with custom cut foam to house a total of six (8) DJI Phantom 4 batteries.

The DJI CINESSD Station is used to connect the DJI CINESSD into a computer for fast, efficient file transfer. Simply remove the CINESSD from your Inspire 2 quadcopter, insert it into the CINESSD Station, then connect the station to a computer via the included USB 3.0 cable. Once connected, you'll be able to export the data from CINESSD onto your computer.

The Mavic 2 Enterprise Intelligent Flight Battery is a 4-cell (4S) lithium-ion polymer (LiPo) battery with a maximum capacity of 3850 mAh. Built-in self-heating technology improves flight times and overall performance in extremely cold environments (14 °F / -10 °C).

The Phantom 4 Intelligent Flight Battery is a four-cell (4S) lithium-ion polymer (LiPo) battery with a maximum capacity of 5870 mAh that is compatible with all Phantom 4 models, including the Phantom 4 Pro V2, Phantom 4 RTK, and Phantom 4 Multispectral.