Browse The Warehouse

The upgraded dual camera Mavic 2 Enterprise Advanced packs a radiometric thermal camera with a maximum resolution of 640x512 and a visual camera with 32x digital zoom. Care Enterprise Basic is also included, providing you with two full aircraft replacements for a small fee at the time of each replacement during your first 12 months of ownership.

The Colorado Drone Chargers PRCS Elite has become a household name in the drone industry thanks to its proven reliability and effectiveness. This Portable Rapid Charging Station (PRCS) is capable of charging up to four Autel EVO II batteries and two USB devices simultaneously getting you back in the air in record time. Get your batteries back to 90% in ~55 minutes, and to 98%+ in ~70 minutes. Designed to work with generators, inverters, and other alternate power sources, all of this power comes packed in a weatherproof hard case and includes CDC Intelligent Charging to monitor voltage and temperature keeping you safe throughout your charge cycles.

The EVO II 8K Gimbal Drone Camera from Autel Robotics features a Sony IMX586 sensor that can capture video footage at a stunning 8K resolution with your EVO II drone. Still photos can achieve an even higher resolution, with support for resolutions up to 8000x6000. Drones are known for their ability to get into tight areas for previously unachievable close-up shots, but when you can't make it with the EVO II, this 8K gimbal can utilize 1-8x zoom (up to 4x lossless) to get the shot you need.

This EVO II battery is a 3-cell (3S) LiPo battery with a maximum capacity of 7100 mAh and a maximum voltage of 13.2 V. This battery is compatible with all EVO II models.

The Autel EVO II Battery Charging Hub allows you to charge up to four batteries off of a single charger. While charging, the battery hub monitors the electric current in real-time to charge up to two batteries simultaneously. On the top of the hub is an illuminated Autel logo which indicates the charging status and if any charging errors have occurred. The battery charging hub requires the power supply that came with your EVO II originally or one that you have purchased separately.

The Car Charger for the Autel EVO II makes charging your batteries in the field a snap. Connect this EVO II Car Charger to your EVO II Battery directly or connect it to the EVO II Battery Charging Hub (sold separately) to charge four batteries in sequence from the comfort of your vehicle.

These are the all-new low-noise propellers for the Autel EVO II Series. This new low-noise design reduces noise and promotes safe, efficient flight. The EVO II drone must be flown with matching propeller types. Never mix-and-match the original version and low-noise version. These EVO 2 props ship in pairs with one clockwise (CW) and one counterclockwise (CCW) propeller.

The Autel EVO II Pro (6K) Camera is the camera that comes included with the Autel EVO II Pro. This camera can either be used as a replacement or as an upgrade if you are looking to add a high-resolution visual camera to your EVO II toolbox. This camera has a 6K 1" sensor, whereas the EVO II camera has an 8K 1/2" sensor. The EVO II features interchangeable cameras and it is very easy to change out or swap your camera payload whether you are needing to replace a camera, or if you choose to upgrade. These swaps can even be conducted in the field, making them ideal for use in public safety, utilities, construction, and other industries.

Provide added protection while in flight with these Propeller Guards for EVO II from Autel Robotics. The propeller guards are designed to quickly attach to the EVO II drone with a simple and secure locking mechanism. Once in place, they are engineered to come into contact with objects or people first, helping to prevent property damage or injury in case of an accident.

This is the OTG (On-The-Go) Micro-USB to Lightning ConnecThor video feed cable from Thor's Drone World.

Monitor your EVO or EVO II's streaming video footage in real-time with the Live Deck for EVO and EVO II drones from Autel Robotics. Normally a drone's streaming camera footage is displayed in FPV goggles or on the pilot's controller display, but with the Live Deck, you can display that footage on a Windows or Mac computer, smartphone, or over your local network. This is the Live Deck V1, compatible with the EVO II V1 and original EVO aircraft.

This is the OTG (On-The-Go) Micro-USB to USB Type-C ConnecThor video feed cable from Thor's Drone World. This coiled cable is ideal for connecting your DJI Mavic Mini, Mavic Air, Mavic Pro, or Mavic 2 remote controller to a mobile device that uses a USB-C connection.

This is the USB 2.0 to Lightning ConnecThor video feed cable from Thor's Drone World. This coiled cable is ideal for connecting your DJI Mavic Pro, or Mavic 2 Series, Inspire 1, Inspire 2, or any DJI remote controller with a USB 2.0 (USB-A) connection to any mobile device that uses Apple's Lightning connector.

This is the USB 2.0 (USB-A) to USB Type-C ConnecThor video feed cable from Thor's Drone World. This coiled cable is ideal for connecting your DJI Mavic Pro, or Mavic 2 Series, Inspire 1, Inspire 2, or any DJI remote controller with a USB 2.0 (USB-A) connection to any mobile device that uses a USB-C connector.

The Mavic Air 2 from DJI is small, portable quadcopter drone with advanced obstacle sensing capabilities and a camera that captures 48 MP images through a 1/2" Quad Bayer Filter sensor. This package is referred to as the "standalone" package as it comes with only the bare essentials to get you flying. All you need is a mobile device of your choice and you're airborne!

This is the USB-C to USB-C ConnecThor video feed cable from Thor's Drone World. This coiled cable is perfect for connecting your DJI Mavic Air 2 or Mini 2 remote to a USB Type-C mobile device.

This is a direct factory replacement of the included battery charger that came with your Mavic Air 2 from DJI. This battery charger only has a single charge lead which can be connected directly to your Mavic Air 2 battery to charge it, or it can be used to power the Mavic Air 2 Battery Charging Hub. This battery charger for the Mavic Air 2 drone also has a USB-A port allowing you to charge most common USB accessories. This battery charger does not come with the required wall cable, which must be purchased separately.

This is the USB Type-C to Lightning ConnecThor video feed cable from Thor's Drone World. This coiled cable is ideal for connecting your DJI Mavic Air 2 or Mini 2 remote controller to a mobile device that uses Apple's Lightning connector.

The Mavic Air 2 from DJI is a small, portable quadcopter drone with advanced obstacle sensing capabilities and a camera that captures 48 MP images through a 1/2" Quad Bayer Filter sensor. This is the Fly More Combo, giving you all the extras you need to fly longer, and protect your kit with the included soft-sided carrying bag.

The compact and foldable design of the DJI Air 2S Drone lets you easily capture breathtaking aerial images and video whenever the mood strikes. It's an ideal alternative for use when traveling on vacation or for photography enthusiasts looking to record from new and unique perspectives. Piloting is made to be easy and intuitive via your smartphone and the DJI Fly app. Simply slip your phone into the included remote controller. Thanks to the Air 2S's 3-axis gimbal, four remote antennae, and OcuSync 3.0 technology, you can receive a stable, live view from the drone up to 7.5 miles away.

The DJI Mavic Air 2 is a small, nimble quadcopter drone with advanced obstacle avoidance and a camera capable of capturing images up to 48 MP through a 1/2" Quad Bayer Filter sensor. This package includes the upgraded DJI Smart Controller remote providing you with a remote and integrated 5.5" sunlight-readable screen and built-in DJI flight apps, as well as the ability to output your drone's live video stream through an HDMI connection.