Professional quality aerial imaging and video is now more affordable with the DJI Mavic 3 Classic. Nearly identical to the standard Mavic 3, the Classic version focuses on the advanced 20MP 4/3" CMOS sensor designed by legendary camera maker Hasselblad. Designed specifically for the Mavic 3 and meeting Hasselblad's rigorous hardware and software standards, the 3-axis gimbal camera is capable of 4K video at 60 fps, a maximum of 5.1K at 50 fps, and 4K slow-motion footage at 120 fps. A remote controller is not included.

The DJI Mavic 3 Battery Charging Hub intelligently charges up to three batteries for the Mavic 3. The Intelligent Flight Battery with the highest power level will be fully charged first. Other batteries will be charged in the same manner, according to their power levels displayed on the battery’s LED indicators.

A leap forward in professional-quality aerial imaging, the Mavic 3 from DJI is their flagship drone that offers a dual-camera setup in a 3-axis gimbal. There's the 20MP wide-angle camera with 4/3" CMOS from legendary camera maker Hasselblad and a 12MP telephoto with 1/2" CMOS, 4K video, and 28x hybrid zoom. You can utilize the telephoto in Explore Mode to scout locations, but its primary function is to be used in conjunction with the wide-angle Hasselblad, transitioning between the two for truly dynamic, cinematic results.

Each blade of these DJI Inspire 3 propellers has been put under precise dynamic balancing tests to increase aerodynamic efficiency and output less noise. Sold in pairs.

These high-altitude DJI Inspire 3 propellers are made especially for use at or above 3000 meters. Using these propellers lower than 3000 meters may result in shorter flight times and undesired flight characteristics. Sold in pairs.

At the peak of aerial cinematography, DJI Inspire 3 offers unprecedented workflow efficiency, camera language, and creative freedom. This all-in-one 8K camera drone empowers professional-level filmmakers to fully maximize the potential of any shot and master the unseen.

The DJI CINESSD Station is used to connect the DJI CINESSD into a computer for fast, efficient file transfer. Simply remove the CINESSD from your Inspire 2 quadcopter, insert it into the CINESSD Station, then connect the station to a computer via the included USB 3.0 cable. Once connected, you'll be able to export the data from CINESSD onto your computer.

The DJI CINESSD Station is used to connect the DJI CINESSD into a computer for fast, efficient file transfer. Simply remove the CINESSD from your Inspire 2 quadcopter, insert it into the CINESSD Station, then connect the station to a computer via the built-in Thunderbolt 3 cable. Once connected, you'll be able to export the data from CINESSD onto your computer.

The DJI Inspire 2 Remote Controller is purposed to be used with the DJI Inspire 2 drone. With integrated DJI Lightbridge technology the remote controller has an effective transmission distance of up to 4.6 miles and is capable of delivering both 1080p/720p video as well as FPV to pilot and camera operators. Switch between 2.4GHz and 5.8GHz** control frequencies to cut through noise for greater signal stability. Dual remote control support with HDMI output.

Inspire 2 Propeller Guards are crafted with 12k pure carbon fiber mixed with high-strength epoxy resin. They're not only light but also 50 times more durable and 100 times more rigid than standard engineering plastics, making them exceptionally hard to break or deform. Small and easy to mount and detach, these guards protect the propellers from colliding with people and objects, providing an additional layer of flight safety. Consider when flying at particularly high speeds, the propeller guards may only have a limited impact on reducing damage from collisions. Always fly with caution and mind your surroundings.

The Mobile Device Holder Adapter is used to connect the old version of the Inspire 2 remote controller mobile device holder to the new version of the Inspire 2 remote controller mounting bracket.

Turn your Inspire 2 into a handheld camera with this pair of Handle Grips from DJI so you can easily capture ground shots. You can also use these handle grips to catch your landing aircraft. The handle grips are easy to mount on the Inspire 2 using the included locks and screws.

These OEM replacement gimbal rubber dampers are designed to replace the factory dampeners that are installed on your DJI gimbal bracket. These dampers are compatible with the Inspire 2 and Matrice 200 Series.

Prevent an accidental loss of your Inspire 2's Zenmuse X7 gimbal with this Gimbal Protection Kit from DJI. This Kit consists of a steel plate and braided steel wire that secures the drone's damping plate to the drone.

With this Module, provide your Inspire 2 Remote Controller with GPS accurate positioning coordinates. This GPS module enables the use of dynamic home points and offers your remote controller positioning information during ActiveTrack.

The DJI Inspire 2 Focus Handwheel 2 Remote Controller Stand enables you to mount the Focus Handwheel to a remote controller. This allows a single operator to both pilot the Inspire 2 quadcopter, and more easily adjust the Zenmuse X5S camera's aperture and focus.

The Inspire 2 Intelligent Flight Battery Charging Hub is designed for use with the Inspire 2 Battery Charger. Four Intelligent Flight Batteries can be placed in the Charging Hub at once, and a maximum of two batteries will be charged at a time. The battery pair with more stored power will be charged first. The Charging Hub will intelligently charge batteries in sequence according to battery power levels from high to low.

This 180W Power Adapter from DJI is the same type that shipped with your Inspire 2 from DJI and is a slim, low-profile power adapter that charges your Inspire 2 remote controller and flight battery using AC power. It takes approximately 1.5 hours to fully charge an Inspire 2 Intelligent Flight Battery or 2.5 hours to charge an Inspire 2 remote controller. When charging both devices together, charging may take longer than 2.5 hours. A compatible C5 (Mickey Mouse) AC power cable is required and sold separately.

The 180W Power Adapter AC Cable from DJI is designed for use with the factory battery charger that originally came with your Inspire 2 aircraft.

DJI Inspire 2 1560T Quick-Release High-Altitude Propellers have been designed by DJI to improve performance with your Inspire 2 at altitudes between 8,200 to 16,400 ft. Designed with a larger propeller pitch increasing the copter's propulsion force at higher altitudes. These propellers are very easy to install and remove thanks to their quick-release design and color-coding to indicate the proper rotation for each motor. These Inspire 2 DJI props are sold in pairs, each coming with one clockwise and one counterclockwise propeller.

DJI Inspire 2 1550T Quick-Release Propellers have been designed by DJI to enable efficient, safe, and reliable flight with the Inspire 2. These propellers are very easy to install and remove thanks to their quick-release design and color-coding to indicate the proper rotation for each motor. These Inspire 2 DJI propellers are sold in pairs, each coming with one clockwise and one counterclockwise propeller.