This External GPS Kit for the DJI Matrice 200 Series V2 provides you with an external GPS antenna which is required when top-mounting a gimbal on the M210 V2 or M210 RTK V2. Some third-party sensors and accessories also utilize the External GPS Kit and the manufacturer of your sensor or accessory should specify when to use it. The GPS antenna is built onto a landing gear mounting bracket that can replace either the left or right-hand mounting bracket already on your aircraft.

The Mavic 2 Shoulder Bag is designed to carry everything you need for a full day of flying. This is the same bag that is included with the Mavic 2 Fly More Kit and Mavic 2 Enterprise Fly More Kit. It holds the Mavic 2 aircraft, a standard remote controller, up to three flight batteries, extra props, and miscellaneous cables.

If there's one brand that resonates with drone pilots, it's Hoodman. This Hoodman drone launch pad is their 5-foot diameter landing pad designed to keep your small drone safe during takeoff and landing. This is the recommended landing pad for drones such as the DJI Matrice 300 RTK.

The DJI Mavic 3 Enterprise Speaker transmits sound over long distances to make rescue and other emergency missions more efficient. The DJI M3E Speaker can save several audio recordings and supports auto loop playback.

The Mavic 2 Enterprise Intelligent Flight Battery is a 4-cell (4S) lithium-ion polymer (LiPo) battery with a maximum capacity of 3850 mAh. Built-in self-heating technology improves flight times and overall performance in extremely cold environments (14 °F / -10 °C).

Whether you need extra storage or you're trying to keep the weight of your M300 case down, the GPC DJI Matrice 300 Battery Case is your answer. The weather-resistant, drop-resistant hard case comes with custom cut foam to house a total of six (6) DJI M300 TB60 batteries.

This is the battery that powers the Mavic 3 drone from DJI. This is a 4-cell (4S) LiPo battery with a maximum capacity of 5000 mAh or 77 Wh. This battery will provide up to 46 minutes of flight time with your DJI Mavic 3.

The DJI Matrice 300 Upward Gimbal Connector adds the ability to mount an upward-facing payload to your DJI M300. This gimbal connector can be attached in addition to the factory single downward gimbal connector, or the available dual downward gimbal connector.

You are not able to attach this gimbal connector if you have the available CSM Radar attached.

The DJI Matrice 300 OSDK Expansion Module mounts to the top of the DJI M300 to allow for the mounting and connection of some available SDK accessories, such as the DJI Manifold 2. Access to DJI's Onboard SDK is required in order to fully utilize the DJI M300 OSDK Expansion Module.

This GPC M30 8 battery case holds up to four sets of TB30 flight batteries and four WB37 batteries giving you enough power for more than 2.5 hours of flight time and ~6 hours of runtime for your RC Plus without the need to charge.

The DJI Matrice 300 Dual Gimbal Connector is an upgrade to the stock gimbal connector. The Dual Gimbal Connector for the DJI M300 allows you to mount two DJI SkyPort-compatible payloads to the bottom of your Matrice 300.

This GPC M30 10 Battery Case holds up to five sets of TB30 flight batteries and five WB37 batteries providing enough power for more than 3 hours of flight time and ~7 hours of runtime for your RC Plus without the need to charge.

The M2EA RTK Module enables your Mavic 2 Enterprise Advanced to fly more accurately and precisely through a connection with an existing NTRIP network. This RTK Module is only compatible with the DJI Mavic 2 Enterprise Advanced. It will not function with the Mavic 2 Enterprise Zoom or Mavic 2 Enterprise Dual.

With DJI's Upward Gimbal Connector, you can now mount a single camera gimbal (sold separately) to the top of your matrice 200 Series Drones.

The DJI Matrice 210 V2 Single Upward Gimbal Connector allows you to mount one camera/gimbal to the top of your Matrice 210 V2. Compatible with Matrice 210 V2 & Matrice 210 RTK V2. This gimbal mount is only compatible with the Matrice 200 Series V2.

Explicitly designed to power the Matrice 30 Series drone, the DJI TB30 Intelligent Flight Battery is a 6-cell (6S) Ternary Lithium battery with a maximum capacity of 5880 mAh and a maximum voltage of 26.1 V. With its self-heating ability, the TB30 can perform even in extreme cold. The TB30 battery can only be charged using the DJI BS30 Intelligent Battery Station.

This GPC M30 12 Battery Case holds up to six sets of TB30 flight batteries, four spare WB37 batteries, an additional RC Plus, and accessories providing enough power for more than four hours of flight time and ~6 hours of runtime for your RC Plus.

DJI X-Port is a high-precision 3-axis gimbal that enables developers to create third-party payloads that best match DJI flight platforms using DJI's pioneering gimbal technology.

When you need to take your Matrice 30 or Matrice 30T and dual RC Plus remotes to your mission site, this compact rugged case will take you there. The GPC case for the M30 and M30T is a balanced, portable all-in-one system. You have room for six TB30 batteries, a compartment for spare props, and even a spot for a UVT ProCare Lens Cleaning Pen, microSD card holder, and other accessories.

The Mavic 2 Enterprise Fly More Kit from DJI includes additional accessories for your Mavic 2 Enterprise drone. This kit features two self-heating flight batteries, a cable to turn them into portable power banks, two pairs of low-noise propellers, chargers, and a shoulder bag to carry it all in. With these items at your disposal, you can stay on scene and in the air longer, even in frigid temperatures as low as 14° F.

The GPC backpack for the Matrice 30 or Matrice 30T will get your mission kit to wherever you may need to launch in nearly any environment imaginable. This DJI M30 backpack holds the M30/M30T, two RC Plus controllers, and six DJI TB30 batteries for plenty of air time out in the wild.