The Autel Robotics EVO II Dual R Enterprise Bundle is loaded with a suite of technology and design optimizations like carbon fiber arms and larger motors. When paired with its bigger propellers, these three improvements yield an additional 5-7 minutes of flight time over the standard EVO II models. Engineered and purposed as a commercial aircraft, the EVO II 640T sports a FLIR Boson 640x512 radiometric thermal sensor and an 8K visual camera capturing still images up to 48 MP. The 640x512 radiometric thermal sensor is built with a 13mm lens and is equipped with 8x digital zoom. Alongside the thermal sensor is an 8K visual camera with a 1/2" CMOS sensor capable of capturing massive 48 MP images with a 4x lossless zoom and up to a total 16x digital zoom. Compatible with the included EVO II Beacon, EVO II Speaker, and EVO II Spotlight, as well as the EVO II RTK Module, which is available separately.

The Autel Robotics EVO II 640T Enterprise Bundle is loaded with a suite of technology and design optimizations like carbon fiber arms and larger motors. When paired with its bigger propellers, these three improvements yield an additional 5-7 minutes of flight time over the standard EVO II models. Engineered and purposed as a commercial aircraft, the EVO II 640T sports an InfiRay 640x512 radiometric thermal sensor and an 8K visual camera capturing still images up to 48 MP. The 640x512 radiometric thermal sensor is built with a 13mm lens and is equipped with 8x digital zoom. Alongside the thermal sensor is an 8K visual camera with a 1/2" CMOS sensor capable of capturing massive 48 MP images with a 4x lossless zoom and up to a total 16x digital zoom. Compatible with the included EVO II Beacon, EVO II Speaker, and EVO II Spotlight, as well as the EVO II RTK Module, which is available separately.

The latest addition to the Autel EVO II Series is the Autel EVO II Pro 6K Enterprise, an all-new commercial aircraft with a 1" CMOS sensor capturing still images up to 20 MP with 3x lossless and 16x maximum digital zoom. The Autel EVO II Enterprise with the EVO II Pro 6K camera has an adjustable aperture range of f/2.8 to f/11 and it captures images through its electronic rolling shutter. The Autel EVO II Enterprise has a swappable payload, ensuring you're never without the perfect sensor for your mission.

The Autel Smart Controller V2 combines precision control with an Android-based tablet that boasts a 7.9" sunlight-readable retina display with a maximum brightness of 2000 nit. The Autel Smart Controller V2 will run for ~4.5 hours and is compatible with the entire Autel EVO II V2 Series, including the EVO II 6K Pro V2, EVO II Dual, Dual R and 640T V2, and the entire EVO II Enterprise Series.

The Colorado Drone Chargers PRCS Elite has become a household name in the drone industry thanks to its proven reliability and effectiveness. This Portable Rapid Charging Station (PRCS) is capable of charging up to four Autel EVO II batteries and two USB devices simultaneously getting you back in the air in record time. Get your batteries back to 90% in ~55 minutes, and to 98%+ in ~70 minutes. Designed to work with generators, inverters, and other alternate power sources, all of this power comes packed in a weatherproof hard case and includes CDC Intelligent Charging to monitor voltage and temperature keeping you safe throughout your charge cycles.

Accurately survey a location from the air with this RTK Module for EVO II Enterprise from Autel Robotics. The module attaches to your EVO II Enterprise drone and utilizes highly sensitive GNSS navigation (GPS, Beidou, and Galileo) and an A-RTK base station (not included) to achieve real-time RTK measurements that can achieve centimeter-level accuracy. With support for PPK and time synchronization, you are not limited by communication links and network coverage needed for real-time data collection. Capture your measurements for post-processing later.

This EVO II battery is a 3-cell (3S) LiPo battery with a maximum capacity of 7100 mAh and a maximum voltage of 13.2 V. This battery is compatible with all EVO II models.

The Autel EVO II Battery Charging Hub allows you to charge up to four batteries off of a single charger. While charging, the battery hub monitors the electric current in real-time to charge up to two batteries simultaneously. On the top of the hub is an illuminated Autel logo which indicates the charging status and if any charging errors have occurred. The battery charging hub requires the power supply that came with your EVO II originally or one that you have purchased separately.

The Car Charger for the Autel EVO II makes charging your batteries in the field a snap. Connect this EVO II Car Charger to your EVO II Battery directly or connect it to the EVO II Battery Charging Hub (sold separately) to charge four batteries in sequence from the comfort of your vehicle.

This 110V Charger for EVO II Batteries and Controllers from Autel Robotics quickly charges a single EVO II Battery while simultaneously charging an EVO II remote controller or other compatible devices such as a smartphone or tablet. This charger plugs into any standard 110V wall outlet and is compatible with the optional EVO II Battery Charging Hub which allows you to charge 4 batteries simultaneously.

This pair of EVO II Enterprise Propellers has been specifically designed by Autel for the EVO II Enterprise platforms as direct factory propeller replacements. Measuring at 10.5" wing-to-wing, enterprise propellers are 17% longer than standard EVO II props enabling a 42 minute flight time.