The Inspire 2 Intelligent Flight Battery Charging Hub is designed for use with the Inspire 2 Battery Charger. Four Intelligent Flight Batteries can be placed in the Charging Hub at once, and a maximum of two batteries will be charged at a time. The battery pair with more stored power will be charged first. The Charging Hub will intelligently charge batteries in sequence according to battery power levels from high to low.

Use this pack of DJI Quick Release Propeller Mounting Plates to install the Quick Release Propellers onto your Inspire 2 quadcopter. Included are 4 mounts with installation hardware. These components are designed to minimize wear between the propeller and the propeller mount, extending the life of your propeller.

DJI Inspire 2 1560T Quick-Release High-Altitude Propellers have been designed by DJI to improve performance with your Inspire 2 at altitudes between 8,200 to 16,400 ft. Designed with a larger propeller pitch increasing the copter's propulsion force at higher altitudes. These propellers are very easy to install and remove thanks to their quick-release design and color-coding to indicate the proper rotation for each motor. These Inspire 2 DJI props are sold in pairs, each coming with one clockwise and one counterclockwise propeller.

With this Module, provide your Inspire 2 Remote Controller with GPS accurate positioning coordinates. This GPS module enables the use of dynamic home points and offers your remote controller positioning information during ActiveTrack.

The 180W Power Adapter AC Cable from DJI is designed for use with the factory battery charger that originally came with your Inspire 2 aircraft.

The DJI Inspire 2 Focus Handwheel 2 Remote Controller Stand enables you to mount the Focus Handwheel to a remote controller. This allows a single operator to both pilot the Inspire 2 quadcopter, and more easily adjust the Zenmuse X5S camera's aperture and focus.

This cable is used to connect the Inspire 2 Battery Charging Hub to the Inspire 1 Battery Charger (compatible with 180 W and 100 W Battery Chargers) for Inspire 2 battery charging.

Turn your Inspire 2 into a handheld camera with this pair of Handle Grips from DJI so you can easily capture ground shots. You can also use these handle grips to catch your landing aircraft. The handle grips are easy to mount on the Inspire 2 using the included locks and screws.

Inspire 2 Propeller Guards are crafted with 12k pure carbon fiber mixed with high-strength epoxy resin. They're not only light but also 50 times more durable and 100 times more rigid than standard engineering plastics, making them exceptionally hard to break or deform. Small and easy to mount and detach, these guards protect the propellers from colliding with people and objects, providing an additional layer of flight safety. Consider when flying at particularly high speeds, the propeller guards may only have a limited impact on reducing damage from collisions. Always fly with caution and mind your surroundings.

The DJI CINESSD Station is used to connect the DJI CINESSD into a computer for fast, efficient file transfer. Simply remove the CINESSD from your Inspire 2 quadcopter, insert it into the CINESSD Station, then connect the station to a computer via the built-in Thunderbolt 3 cable. Once connected, you'll be able to export the data from CINESSD onto your computer.

These OEM replacement gimbal rubber dampers are designed to replace the factory dampeners that are installed on your DJI gimbal bracket. These dampers are compatible with the Inspire 2 and Matrice 200 Series.

The Mobile Device Holder Adapter is used to connect the old version of the Inspire 2 remote controller mobile device holder to the new version of the Inspire 2 remote controller mounting bracket.

Prevent an accidental loss of your Inspire 2's Zenmuse X7 gimbal with this Gimbal Protection Kit from DJI. This Kit consists of a steel plate and braided steel wire that secures the drone's damping plate to the drone.

The DJI Inspire 1 100W Power Adaptor Cable is compatible with the Inspire 1 remote and batteries. This product comes without an AC cable.

The Power Cord for Inspire 1 180W Rapid Charger from DJI features a North American-style three-prong grounded connector.

The DJI Inspire 1 Battery Charging Hub intelligently charges up to four batteries for the Inspire 1 Quadcopter. Compatible Battery Models include the TB47 Intelligent Flight Battery and the TB48 Intelligent Flight Battery. The Intelligent Flight Battery with the highest power level will be fully charged first. Other batteries will be charged in the same manner, according to their power levels displayed on the battery’s LED indicators.

Connect your Mavic Pro controller to a mobile device with a Micro-USB port with this DJI Mavic Pro RC Cable.

The Mavic Pro RC Cable with Reverse Micro-USB Connector from DJI allows you to connect the Mavic controller to a mobile device.

Connect your Mavic Pro controller to a mobile device with a USB-C connector with this DJI Mavic Pro RC Cable.

Connect your Mavic Pro controller to a mobile device with a Lightning port with this DJI Mavic Pro RC Cable.

The 50W Power Adapter from DJI charges your Mavic Pro remote controller and flight battery using AC power. Charge your Mavic Pro Intelligent Flight Battery in a little over an hour and your Mavic Pro Controller in 2 hours. When charging the flight battery and controller together expect charge times closer to 2.5 hours. AC cable is required (sold separately).