SwellPro SplashDrone 4 PL1-S Payload Drop System
69.00 69.00 69.0 USD
The PL1-S Payload Drop System enables the SplashDrone 4 (sold separately) to carry and release various payloads to stranded swimmers, rescue victims, or anywhere you need to deliver an item. The SplashDrone 4 has a maximum payload of ~4.5 pounds and the PL1-S can be run alongside one of the available camera payloads such as the GC3-S 4K camera or GC3-T thermal camera. The weight of the camera you have installed will impact the available payload of the aircraft.
DJI X-Port
390.00 390.00 390.0 USD
DJI X-Port is a high-precision 3-axis gimbal that enables developers to create third-party payloads that best match DJI flight platforms using DJI's pioneering gimbal technology.
Autel Robotics EVO II 8K Camera
579.00 579.00 579.0 USD
The EVO II 8K Gimbal Drone Camera from Autel Robotics features a Sony IMX586 sensor that can capture video footage at a stunning 8K resolution with your EVO II drone. Still photos can achieve an even higher resolution, with support for resolutions up to 8000x6000. Drones are known for their ability to get into tight areas for previously unachievable close-up shots, but when you can't make it with the EVO II, this 8K gimbal can utilize 1-8x zoom (up to 4x lossless) to get the shot you need.
SwellPro SplashDrone 4 GC2-S Night-Vision Camera Payload
699.00 699.00 699.0 USD
The GC2-S Night-Vision Camera from SwellPro is built specifically for the SplashDrone 4 (sold separately) to enable nighttime operations through its 2-axis stabilized night-vision camera and spotlight all in one single unit. The GC2-S can be run alongside the available PL1-S Payload Drop System.
SwellPro SplashDrone 4 GC3-S 4K Camera Payload
699.00 699.00 699.0 USD
The GC3-S 4K Camera from SwellPro is built specifically for the SplashDrone 4 (sold separately) to enable the highest-resolution visual imagery possible on the world's leading waterproof drone. The GC3-S can be run alongside the available PL1-S Payload Drop System.
Autel Robotics EVO II Pro 6K Camera
879.00 879.00 879.0 USD
The Autel EVO II Pro (6K) Camera is the camera that comes included with the Autel EVO II Pro. This camera can either be used as a replacement or as an upgrade if you are looking to add a high-resolution visual camera to your EVO II toolbox. This camera has a 6K 1" sensor, whereas the EVO II camera has an 8K 1/2" sensor. The EVO II features interchangeable cameras and it is very easy to change out or swap your camera payload whether you are needing to replace a camera, or if you choose to upgrade. These swaps can even be conducted in the field, making them ideal for use in public safety, utilities, construction, and other industries.
DJI Zenmuse X5 Body Only
1,299.00 1,299.00 1299.0 USD
The Zenmuse X5 from DJI was the world's first Micro Four Thirds drone camera. This is the Zenmuse X5 Body Only, meaning it does not come with a lens, allowing you to choose any existing Micro Four Thirds lens, or purchase one separately that's perfect for your mission. The Zenmuse X5 is only compatible with the DJI Inspire 1 V2 or Matrice 600 Pro (gimbal mounting bracket is required).
DJI Zenmuse X5S
2,049.00 2,049.00 2049.0 USD
The Zenmuse X5S was designed for high-end professional aerial imaging by DJI. The Zenmuse X5S features an updated Micro 4/3rds sensor, a dynamic range of 12.8 stops with a much-improved signal-to-noise ratio, and color sensitivity which allows the Zenmuse X5S to capture high-quality, high-resolution images when combined with the extraordinary CineCore 2.0 image processing system. The new CineCore 2.0 image processing system on the Inspire 2 makes the Zenmuse X5S capable of capturing 5.2K30 CinemaDNG video and Apple ProRes video, as well as 4K60 using H.264 and 4K30 in H.265 (both at 100 Mb/s). Continuous DNG burst shooting at 20 fps with 20.8MP images is also supported.
DJI Wingsland Z15 Gimbal Spotlight
2,500.00 2,500.00 2500.0 USD
The Wingsland Z15 gimbal spotlight is a bright, fully stabilized drone spotlight. Compatible with the DJI Matrice 300 Series and Matrice 200 Series V2, the Wingsland Z15 is plug-and-play and fully controllable through the DJI Pilot App. The Z15 is capable of several operating modes, including constant-on and two different strobe patterns for either increased visibility or disruption. The Wingsland Z15 has built-in active cooling with a rear-mounted fan and it is not weather-rated, so it is recommended to keep the Z15 out of the elements as much as possible.
DJI Zenmuse X7
2,899.00 2,899.00 2899.0 USD
The Zenmuse X7 from DJI is a Super 35 drone camera capable of capturing 24 MP stills and fully stabilized video up to 4K at 60 fps thanks to its built-in 3-axis stabilized detachable gimbal. The DJI Zenmuse X7 is compatible with the Inspire 2 and Matrice 200 Series V2 aircraft and installation is a snap thanks to DJI's quick-release SkyPort gimbal attachment with color-coded markings to ensure a safe and secure installation every time. Built primarily for capturing stunning aerial footage, the Zenmuse X7 when used with the available 24mm, 35mm, and 50mm DL lenses also boasts a mechanical shutter, making it ideal for mapping and surveying where image clarity and sharpness are paramount. The Zenmuse X7 does not include a lens, so be sure to select one of the available DL-S or DL Mount lenses ranging from 16mm to 50mm.
DJI Zenmuse H20 w/Care Enterprise Basic
3,639.00 3,639.00 3639.0 USD
The Zenmuse H20 from DJI is an all-new hybrid sensor solution for the DJI Matrice 300 RTK. Boasting a 20 MP, 23x zoom visual camera alongside a 12 MP wide-angle visual camera and a laser range finder usable out to ~3900ft, the Zenmuse H20 packs more visual imagery into a single payload than ever before.
DJI Zenmuse H20 w/Care Enterprise Plus
3,849.00 3,849.00 3849.0 USD
Autel Robotics EVO II 640T Gimbal Camera
5,700.00 5,700.00 5700.0 USD
The EVO II 640T Gimbal Drone Camera from Autel Robotics features an RGB image sensor that can capture video footage up to 8K resolution, still photos up to 8000x6000, and radiometric thermal images at 640x512 resolution. This EVO II 640T Gimbal Camera is compatible with both the EVO II V1 and EVO II V2 airframes.
DJI Zenmuse P1 w/35mm Lens & Care Enterprise Basic
6,250.00 6,250.00 6250.0 USD
The Zenmuse P1 from DJI is a full-frame sensor camera on a 3-axis stabilized with a global mechanical shutter capable of capturing 45 MP photos with stunning clarity and unprecedented accuracy thanks to TimeSync 2.0 and direct integration with the DJI Matrice 300 RTK drone.
DJI Zenmuse P1 w/35mm Lens & Care Enterprise Plus
6,800.00 6,800.00 6800.0 USD
The Zenmuse P1 from DJI is a full-frame sensor camera on a 3-axis stabilized gimbal with a global mechanical shutter capable of capturing 45 MP photos with stunning clarity and unprecedented accuracy thanks to TimeSync 2.0 and direct integration with the DJI Matrice 300 RTK drone.
FLIR VUE TZ20-R
7,500.00 7,500.00 7500.0 USD
Dual FLIR Boson® thermal cameras provide four times more radiometric pixels on target at every zoom level versus the competition, offering an unmatched 20x zoom capability.
MicaSense RedEdge-P Sensor Kit
7,995.00 7,995.00 7995.0 USD
The RedEdge-P is the rugged, high-quality, powerful multispectral sensor you’ve come to trust, now with a high-resolution panchromatic band for pan-sharpened output resolutions of 2cm (at 60m) - twice the ground resolution of the industry-standard RedEdge-MX. It is a single camera solution that captures calibrated high-resolution multispectral and RGB imagery, with an optimized FOV and capture rate for efficient flights. This solution seamlessly integrates a high-resolution all-color imager with synchronized multispectral imagers to enable pixel-aligned outputs at previously unattainable resolutions while maintaining the efficiency and reliability of the RedEdge legacy. Raw data from RedEdge-P is open for processing using the standard household softwares in the industry.
MicaSense Dual Camera Kit
9,895.00 9,895.00 9895.0 USD
Integrating two five-band cameras, the RedEdge-MX and the new RedEdge-MX Blue, this dual-camera multispectral imaging system enables the most advanced remote sensing and vegetation research applications. The Dual Camera Kit comes ready-to-fly on the DJI Matrice 300 RTK, DJI Matrice 200 Series, or DJI Inspire 2.
MicaSense RedEdge-P Sensor Kit for DJI Matrice 300 Series
9,995.00 9,995.00 9995.0 USD
The RedEdge-P is the rugged, high-quality, powerful multispectral sensor you’ve come to trust, now with a high-resolution panchromatic band for pan-sharpened output resolutions of 2cm (at 60m) - twice the ground resolution of the industry-standard RedEdge-MX. It is a single camera solution that captures calibrated high-resolution multispectral and RGB imagery, with an optimized FOV and capture rate for efficient flights. This solution seamlessly integrates a high-resolution all-color imager with synchronized multispectral imagers to enable pixel-aligned outputs at previously unattainable resolutions while maintaining the efficiency and reliability of the RedEdge legacy. Raw data from RedEdge-P is open for processing using the standard household softwares in the industry.
DJI Zenmuse H20T w/Care Enterprise Basic
11,209.00 11,209.00 11209.0 USD
DJI Zenmuse H20T w/Care Enterprise Plus
11,799.00 11,799.00 11799.0 USD