These are OEM replacement thumb Control Sticks for your DJI Mavic Air. Attach the Control Sticks by screwing them into the provided mounts on the controller.

Take on the go power wherever you are with the DJI Mavic Air Battery to Power Bank Adapter. Transform your Mavic Air Battery into a charging hub with a USB Type A-Port, allowing you to power mobile devices, tablets, and other devices.

DJI Mavic Air Quick-Release Propellers have been designed by DJI to enable efficient, safe, and reliable flight with the DJI Mavic Air. Easy to install and remove thanks to their quick-release design and color-coding to indicate the proper rotation for each motor, these Quick-Release props are sold in pairs, each coming with one clockwise and one counterclockwise propeller.

Each DJI Mavic 3 Enterprise propeller blade has been put through precise dynamic balancing tests to increase flight time with reduced noise, higher aerodynamic efficiency, and lower power consumption. The new safety design of the DJI M3E propeller causes less damage to people or other objects in the event of an accident.

This pair of low-noise, quick-release propellers are direct factory replacements of the propellers that come with the DJI Mavic 3 and DJI Mavic 3 Cine drone. These Mavic 3 props are sold in pairs, each coming with one clockwise (CW) and one counterclockwise (CCW) propeller.

The DJI Mavic Mini Two-Way Charging Hub intelligently charges up to three Mavic Mini batteries in sequence. The Intelligent Flight Battery with the highest power level will be fully charged first. Other batteries will be charged in the same manner, according to their power levels. Charge three MB2-2400mAh-7.2V packs in 4.5 hours to charge all three packs. Charging three MB3-1100mAh-7.6V batteries, all three will charge in up to 2.5 hours.

The NANUK 909 Case for the DJI Mavic Mini is designed to organize, protect and carry your Mavic Mini aircraft. Available in several colors, this Graphite NANUK 909 is a waterproof hard case with a lightweight and durable NK-7 resin shell and PowerClaw superior latching system. With NANUK’s exclusive locking and latching system, your case stays shut and secured until you are ready to open it.

The NANUK 909 Case for the DJI Mavic Mini is designed to organize, protect and carry your Mavic Mini aircraft. Available in several colors, this Black NANUK 909 is a waterproof hard case with a lightweight and durable NK-7 resin shell and PowerClaw superior latching system. With NANUK’s exclusive locking and latching system, your case stays shut and secured until you are ready to open it.

This is an upgraded, drop-in replacement foam set for the factory Mavic 2 Enterprise hard case. This foam set is custom cut the standard Mavic 2 remote controller and all of the accessories you need for a full day in the field.

The Two-Way Charging Hub for the DJI Mini 2 can hold up to three flight batteries and it will charge them in sequence starting with the battery that has the most power. This DJI Mini 2 Two-Way Charging Hub support both Quick Charge and USB Power Delivery technologies for charging batteries at up to 29W. This charging hub is only compatible with the Mini 2 Intelligent Flight Battery - Mavic Mini and Mini 3 Pro batteries are not compatible.

Power up your Mavic Air battery on the go and in the car with the DJI Mavic Air Car Charger from DJI. This intelligent battery has overheating protection. Charge Times: 48 min 60° to 104° and 1hr 37 min 41° to 59° F.

The DJI Mavic Air Battery Charging Hub intelligently charges up to four smart batteries for the Mavic Air. The Intelligent Flight Battery with the highest power level will be fully charged first. Other batteries will be charged in the same manner, according to their power levels displayed on the battery’s LED indicators.

You can adjust the amount of light that reaches your camera lens with this set of Mavic 2 Zoom ND filters. Designed to capture the images you need in most light conditions, this pack of neutral density filters from DJI includes ND4, ND8, ND16, and ND32 filters allowing 1/4, 1/8, 1/16, and 1/32 of incoming light neutrally without changing the color of the light.

You can adjust the amount of light that reaches your camera lens with this set of Mavic Air ND filters. Designed to capture the images you need in most light conditions, this pack of neutral density filters from DJI includes ND4, ND8, ND16, and ND32 filters allowing 1/4, 1/8, 1/16, and 1/32 of incoming light neutrally without changing the color of the light.

The DJI Mavic 2 Enterprise Beacon is engineered for ultimate visibility and easily mounts to the top of your Mavic 2 Enterprise. Designed to U.S. Federal Aviation Administration standards this flashing strobe is visible over 3 miles away, satisfying waiver regulations for flying during low light conditions.

The DJI Mavic 3 Battery Charging Hub intelligently charges up to three batteries for the Mavic 3. The Intelligent Flight Battery with the highest power level will be fully charged first. Other batteries will be charged in the same manner, according to their power levels displayed on the battery’s LED indicators.

The DJI 100W USB-C Power Adapter is used to charge the DJI Mavic 3 Enterprise Series Battery, DJI RC Pro Enterprise remote controller, DJI Avata Battery Charging Hub, or mobile devices with a USB-C port by connecting to a power outlet. Includes wall cable and USB-C cable.

When connected to a designated charger, the DJI Mavic 3 100W Battery Charging Hub can expand the charging interface to three. The battery charging hub enhances efficiency by charging batteries in sequence according to their remaining power level, with more fully-charged batteries receiving power first.

This hard case by Go Professional Cases (GPC) for the DJI Mavic 2 Pro/Zoom includes storage for the incredible 5.5" or 7.85" CrystalSky monitors by DJI. Unlike the factory hard case from DJI, this GPC case allows you to carry the Mavic 2 Pro/Zoom and a total of 3 flight batteries and 2 CrystalSky batteries for over 2 hours of flight time. Designed to allow you to carry everything you need for a full day's work in a rugged, water-resistant, military spec hard case made in the USA.

This is the battery that powers the Mavic Air 2 and Air 2S drones from DJI. This is a 4-cell (4S) LiPo battery with a maximum capacity of 3500 mAh or 40.42 Wh. This battery will provide up to 34 minutes of flight time with your DJI Mavic Air 2 and up to 31 minutes of flight time with your DJI Air 2S.

Protecting your Mavic 2 and accessories from the elements, has never been easier, with this Protector Hard Case for Mavic 2 Enterprise from DJI. Sturdy, rugged, and impact-resistant this case is perfect for capturing aerial images in remote locations. With an Ingress Protection rating of IP67 this case is dustproof and submersible in water to 3.3'.

The case's interior includes EVA foam inserts with custom cutouts providing precise fits for the Mavic 2 and its host of accessories, including the optional Mavic 2 Fly More Kit. Securely close via two external latches and add optional padlocks (not included) for theft prevention, with the designed padlock cutouts.